Conventional Reels

Daiwa has done it again, with their Daiwa Saltiga Conventional Reels. These reels are absolutely unbelievable. The frame and side plates are both machined out of a solid aircraft-grade aluminum bar stock which is anodized to assist in preventing corrosion. The spool is also machined out of air-craft grade aluminum which allows the reel maximum casting performance and added strength. The handle on these reels are rubberized power handles which were designed for maximum comfort and performance for when you are reeling in that huge fish. The retrieve on the Daiwa Conventional Reel is amazing at 35 inches of line with every handle turn. These reels are built for today’s super strong braided lines, and the “guts” of this reel prove it. The drag on this reel is has grease-impregnated graphite and stainless steel washers which keeps the drag operating to it's full potential, even under the longest and heaviest of runs. The gears are machine-cut, massive, high-strength alloy gears; which will withstand the strain that comes with fishing with super braided lines. There are 6 ball bearings and one roller bearing to guarantee your reel functions to maximum performance at all times. Inside and out, these reels are designed to be workhorses, it doesn't get any tougher than these reels.

If you are an avid saltwater fisherman and want a reel that can handle the brutal treatment of braided line, but also want to be able to use monofilament when you choose, then the Daiwa Saltiga SA20 Conventional Reel is the one for you.

The "guts" of this conventional reel are impressive. It has extremely strong alloy gears, that’s sole purpose is to make sure your retrieve is smooth and successful. There is one roller bearing and six ball bearings on the inside that are specially coated and sealed to prevent any debris from corroding them. The frame and side plates are machined of extremely rigid anodized solid bar stock aluminum which will help in preventing corrosion. The spool of this reel is also constructed of accuracy machined; aircraft grade aluminum which gives the reel added strength.  The handle of this reel has two positions and has a massive, hand-fitting grip for added comfort.

Features of the SA20:

The Daiwa Saltiga SA30 Conventional Reel was designed with heavy duty saltwater fishing in mind. The handle on this reel has the ability to be locked in two different positions depending on your desire, and also comes with an oversized comfortable hand fitting grip to allow you the utmost comfort when fighting big game fish. This reel has one of the fastest retrieves on the market, pulling in almost one yard of line per handle turn.  The spool, frame and side panels are all constructed of aircraft-grade aluminum for maximum performance and strength.

Rugged, precision components are found throughout this entire reel. There are precision machined, massive, high-strength alloy gears, which will allow an extremely smooth retrieve. The washers within the drag are a combination of stainless steel and grease-impregnated graphite washers. There are six ball bearings as well as one roller bearing that make the retrieve of this reel superb.

Features of the SA30:

The Daiwa Saltiga 30L Conventional Reel is a left handed reel which was built to Saltiga standards, this reel is specifically designed to withstand the brutal treatment of today’s super tough braided line, as well as still being able to handle monofilament line without a problem.

The Daiwa Saltiga SA30L's machined aircraft-grade aluminum frame, anodized side plates, and spool yield a super lightweight, but extreme strong, durable reel, that's corrosion resistant. The handle on this reel is able to be put into two different positions, and has an oversized soft hand grip for added comfort. It has a dual-system infinite Anti-Reverse, and one of the fastest retrieves on the market, at almost one yard per handle turn.

The drive train of this reel is composed of 7 bearings, 6 ball bearings and one roller bearing, which make the task of reeling in that massive fish a breeze. You are able to adjust the drag of this reel with ease due to the fact that the washers of this reel are a combination of grease impregnated graphite and stainless steel.

Features of the SA30L:

 The Daiwa Saltiga 30T Conventional Reel was built to Saltiga standards with a few added extras. This reel is specifically design to endure the cruel handling that today’s tremendously strong braided lines demand, as well as still being able to handle monofilament line without an issue.

The Daiwa Saltiga SA30T frame design differs slightly for all the other Daiwa Saltiga Conventional Reels; it has a slightly slimmer design, with higher side plates, although it still is made with aircraft-grade anodized aluminum which is not only extremely strong, but will also prevent corrosion. The SA30T has a spool clicker that allows you to hear when there is a fish on your line and it is beginning to run. The handle on this reel has the ability to be locked into two different positions, and has an extra comfortable oversized soft hand grip. There is a dual-system infinite Anti-Reverse and has one of the fastest retrieves on the market of over one yard per turn of the handle.

The drive train is one of the smoothest on the market due to the fact that it constructed of 7 bearings, 6 ball bearings and one roller bearing, which make the task of reeling in that enormous fish easy. You are able to adjust the drag of this reel with ease due to the washers in the drag of this reel being a combination of grease impregnated graphite and stainless steel.

Features of the SA30T:

If you enjoy fishing with braided line, but the reels you use just can’t handle the stress and abuse that braided line dishes out, then the Daiwa Saltiga SA40 Conventional Reel is the one for you. It is designed inside and out to be an absolute powerhorse.

The drag of this reel is assembled with grease-impregnated graphite and stainless steel washers that allow you to tighten or loosen the drag with ease even under the heaviest of loads. The drive train has six ball bearings and one roller bearing, which will make the retrieve as smooth as silk. There are also machine-cut, high strength alloy gears which are designed to stand-up to the tortures of braided line and big game fish.

In order for a reel to perform like it should under the strain of braided line, the outside design is just as important as the inside. Daiwa definitely took this into consideration when they beefed up the outside design to withstand pretty much anything. In order for a reel to function properly, you must make sure the drive train stays in-lined at all times, Daiwa ensures this with the super strong and rigid, anodized, solid bar air-craft grade aluminum. The handle on this conventional reel has two positions that it is able to set into and has oversize, super comfortable grip. The spool of this reel comes equipped with a spool clicker, so you are able to hear when a fish is beginning to run with your line, or it you need to tighten the drag.

Features of the SA40:

 The Daiwa Saltiga SA50 Conventional Reel was designed to withstand today’s super strong braided line, as well as still being able to handle monofilament with ease. If you enjoy saltwater fishing with braided line, you understand that the positive aspects of it, being extremely strong and thin, but you also know the strain it puts on a normal reel’s components.

In order to design a reel which is able to perform to its greatest potential when using braided line, you need to start with the exterior. Daiwa certainly took this into deliberation when they beefed up the exterior design to withstand pretty much anything. In order for a reel to function properly, you must make sure the drive train stays in-line at all times, Daiwa has taken this into consideration with their super strong and rigid, anodized, solid bar aircraft grade aluminum which also is corrosion resistance. The handle on this conventional reel is able to be set in two different positions to fit your liking and has an oversized, super comfortable grip. The spool of this reel comes equipped with a spool clicker, so you are able to hear when a fish is beginning to run with your line, or it you need to tighten the drag.

The drag of this reel contains grease-impregnated graphite and stainless steel washers that allow you to adjust the drag with ease even under the heaviest of loads. There are also machine-cut, high strength alloy gears which are design to stand-up to the tortures of braided line and big game fish. The drive train is designed for ultimate performance with its six ball bearings and one roller bearing, which will make the retrieve as smooth as silk. There are also machine-cut, high strength alloy gears which are designed to stand-up to the tortures of braided line and big game fish.

Features of the SA50:

Daiwa has made some great improvements on the Daiwa Sealine SG17LCA Line Counter Reel. They are now ideal for downrigger, diving planers or flat line trolling. The one piece graphite frame is not only extremely durable, but will also prevent corrosion from affecting the way your reel performs. The frame houses an anodized forged aluminum spool, which is super tough but lightweight so it doesn’t weigh your reel down and it also holds a generous amount of line on your reel. This Daiwa Line Counter Reel has a Walleye Special Handle with dual paddled handles for your comfort and convenience. The reliable and durable line counter on top of this reel measures the amount of line in feet that has been let out, so dropping back into the strike zone has never been easier.

The interior is designed to perform to its fullest potential. There is a Power Mesh Drive that allows for maximum winding power and two stainless steel ball bearings so you are able to reel in any type of fish with ease. The interior gears of this reel are machine-cut bronze gears, which will last for many years. The drag is composed of big diameter; Teflon impregnated felt washers that allow you to adjust the drag as you need to with no hesitation.

Features of the Daiwa Sealine SG17LCA:

There are some great improvements on the Daiwa Sealine SG27LCA-W Line Counter Reel which make them ideal for downrigger, diving planers or flat line trolling. You will only need to use this reel once to realize there are no other reels out there like it.

The outside of this reel is designed for durability and performance. The one piece graphite frame is not only extremely heavy-duty, but will also prevent corrosion from the harsh elements that saltwater fishing deals out. The frame contains an anodized forged aluminum spool, which is not only extremely resilient, but super lightweight so it doesn’t hamper your fishing adventures; it also has the capability to hold an amazing amount of line. This Daiwa Line Counter Reel comes equipped with a double-paddled Walleye Handle that comes with two super comfortable hand grips. With the line counter on the top of this reel, you are able to know exactly how many feet of line is out, so when you enter a strike zone, you are able to bring in that big fish and drop your jig or bait right back where it was.
 
A reel is only as strong as the insides, and Daiwa certainly proves this. The drive train is Power Mesh which allows you maximum winding power, so you don’t have to worry about not being able to bring in big fish. The gears of this reel are machine-cut bronze, which will last for many years. The drag is collected of massive; Teflon impregnated felt washers that allow you to adjust the drag with no problem whether there is a fish on your line or not.

Features of the Daiwa Sealine SG27LCA-W:

Daiwa has succeeded in designing the Daiwa Sealine SG47LCA Line Counter Reel to be the perfect reel for downrigger, diving planers or flat line trolling. Once you use this reel you will never want to go back to your old reel.

A great reel starts with the interior design. The gears of the SG47LCA are machine-cut bronze that are designed to stand up to whatever you choose to throw at it. There is a Power Mesh drive which will give you maximum winding power. The drag of this reel houses massive, Teflon impregnated felt washers which let’s you tighten or loosen the drag easily no matter when you choose to.

The exterior of this reel is extremely durable and is able to perform even under the most strenuous loads. The frame has an anodized forged aluminum spool, which is not only extremely rigid, but super lightweight so it doesn’t weigh down your fishing pole; it also holds an amazing amount of line. The solid graphite frame is not only is very tough but will also prevent corrosion from the elements you will find when saltwater fishing. This Daiwa Line Counter Reel come with a counter balance handle with an extremely comfortable hand grip. With the line counter on the top of this reel, you are able to know exactly how many feet of line is out, so when you enter a strike zone, you are able to retrieve that fish and proceed to drop your jig or bait right back where it was.
 
Features of the Daiwa Sealine SG47LCA:

The Shimano Trinidad 12 Conventional Reel has a new narrower frame design so that you can experience greater retrieve with less wobble and faster pickup.  The Trinidad 12 is constructed of a Forged Aluminum Frame, Aluminum Sideplates, and an Aluminum Spool making for a tough, lightweight reel that only weighs 15 oz.  The insides of the Trinindad 12 has all the classic features of a Shimano Reel.  There are six Anti-Rust Ball Bearings and 1 Roller Bearing.  Super Stopper and Assist Stopper for a solid hookset every time.   The Trinidad 12 also features a Counter Balanced Handle and adjustable Tension Clicker that allows you to accommodate many different bait sizes or rig weights.
 
Shimano Trinidad 12 Features:

Shimano Trinidad 14 Features:

Shimano Trinidad 16 Features:

Shimano Trinidad 30 Features:

Shimano Trinidad 40 Features:

Shimano Trinidad 50 Features:

Shimano Calcutta 50 B Features:

Shimano Calcutta 200 GTB Features:

Shimano Calcutta 400 B Features:

Shimano Calcutta 400 BSV Features:

Shimano Tyrnos 8 Features:

Shimano Tyrnos 10 Features:

Shimano Tyrnos 12 Features:

Shimano Tyrnos 16 Features:

Shimano Tyrnos 20 Features:

Shimano Tyrnos 50 LRS Features:

• Weight: 18.6 oz.
• Gear Ratio: 4.2:1
• Graphite Frame
• Graphite Sideplate
• Aluminum Spool
• Rod Clamp
• Barrel Handle Grip
• Anti-Rust Bearing (A-RB)
• Clicker Alarm
• Line Capacity Mono (yds/lb) 450/20

Shimano TLD 20 Lever Drag Reel Features:

Shimano TLD 25 Lever Drag Reel Features:

Shimano TR 100 G Features:

Shimano TR 200 G Features: