If you are looking for a conventional reel that is designed for durability and reliability, then you are looking for the Daiwa Saltist STT30H. With its Full Metal Jacket design, it was made for handling the brutal punishments of today’s braided lines.

The guts of this reel are full of great features. There ball bearings of the spool are specially coated and sealed in order to be corrosion resistant, and will prevent debris and grit from getting into the spool and affecting its performance. The interior of the drag is made from stainless steel, and is equipped with grease impregnated washers which eliminate any concerns about being able to adjust the drag, no matter how heavy of a load is on your line. You have 30% more winding power with this reel due to the fact that it has super tough alloy stock gears, which guarantees durability and smoothness.

The frame of Daiwa Saltist Coventional Reels are constructed of heavy duty solid aluminum which allows the reel to perform to its fullest potential, even while under the strain of a hard fighting fish.  The drag is able to tightened up to 22 lbs with ease, and cranking is easy with a handle designed for comfort.  The handle can be locked into two different positions so you can decided which is more comfortable to make things easier on your hand when pulling in to long retrieves.  A dual anti-reverse system on this conventional reel prevents your spool and handle from back spinning when you are casting, meaning more time fishing and less time fixing birds nests.

Features:

Weight: 17.3 oz.

Gear Ratio: 6.1:1

36” of line per handle turn

Mono Line Capacity: 14/490, 20/295, 25/230

Braided Line Capacity: 40/380, 50/280

Rugged, all-metal construction with rigid, one-piece aluminum frame

CRBB shielded, Corrosion Resistant Ball Bearings on spool

Super Drag

Total of four ball bearings and roller bearing

Up to 30% greater winding power

Aluminum rod clamp

Powerful, high-strength alloy gears

Dual Anti-Reverse systems

Dual-position power handle

Daiwa Warranty:
Daiwa will repair or replace without charge any Daiwa rod or reel which is defective in workmanship or materials within one year from the date of purchase by the consumer. Please retain your sales slip as proof of purchase date in the event warranty work becomes necessary. Please do the following when returning rods or reels for warranty repair: Do not remove parts, enclose proof of purchase and a statement of warranty claim with nature of problem. Also, please list the model name and number of reel/rod and your return address and to protect against loss or damage in transit, your reel/rod should be carefully packaged and adequately insured. Please retain all shipping receipts.